PU Top Coat Timing Belts

PU Top Coat Timing Belts

PU Top Coated Timing Belt are manufactured in thermoplastic polyurethane, with continuous spiral steel cords. This Type of belt is developed for good running characteristics and high traction loads. They are especially suited for power transmission and conveying with high loads and high speeds(up to 10,000RPM) The addition of a nylon coating on the teeth during production enhances the running properties for specific applications and reduces the noise frictional coefficient. An extra thickness of special coating is also possible on the back of the belt offering extra protection against aggressive or heavy products. 

Properties    

 - Low noise, High flexibility, Low pre-tension.    

 - Low maintenance, High abrasion resistance,    

 - linear speeds up to 80M/sec, consistent dimensional stability.     

 - working temperature range -30°C to + 80°C (up to+H0°Cfor short period)     

 - Anti-Ageing, Hydrolysis, UVA, Ozone High resistance to oil, fat and grease good resistance to most acids and alkalis   

Color: Transparent, Pink, Grey, Coffee    

Cords: Steel, Kevlar, Nylon    

Coating: PU timing belts can be manufactured with special coatings, in order to fit many applications with different requirements, such as red rubber, Linatex, APL, PU. etc.    

• All types can be coated PAZ/PAR (Green/Black fabric on tooth side or back side)    

• All types can be coated with Extra-Backing, like Supergrip, Linatex, APL etc.    

Table 1