loading
PIONWAY
| Availability: | |
|---|---|
| Quantity: | |
Product Description
PU Jointed Timing Belts
Jointed/Welded Belts are welded from open-end belts, all the kinds and any length may be obtained tooth by tooth (minimum 600mm length). The unique chemical and mechanical characteristics of the belts together with the possibility of a wide variety of backings in different materials make the belts ideal for all conveying applications where synchronization is required. The engineer designer has unlimited possibilities to develop unique designs.
Properties
- Low noise, High flexibility, Low pre-tension.
- Low maintenance, High abrasion resistance,
- linear speeds up to 80M/sec, consistent dimensional stability.
- working temperature range -30°C to + 80°C (up to+H0°Cfor short period)
- Anti-Ageing, Hydrolysis, UVA, Ozone High resistance to oil, fat and grease good resistance to most acids and alkalis
Color: Transparent, Pink, Grey, Coffee
Cords: Steel, Kevlar, Nylon
Coating: PU timing belts can be manufactured with special coatings, in order to fit many applications with different requirements, such as red rubber, Linatex, APL, PU. etc.
• All types can be coated PAZ/PAR (Green/Black fabric on tooth side or back side)
• All types can be coated with Extra-Backing, like Supergrip, Linatex, APL etc.
Table 1
| Profile | Production Range(mm) | |
| T5 T10 T20 | 500-1,000,000 | |
| AT5 AT10 AT15 AT20 | 500-1,000,000 | |
| ATK10 TK10 | 500-1,000,000 | |
| HTD 5M 8M 14M | 500-1,000,000 | |
| STD 5M 8M 14M | 500-1,000,000 | |
| RPP 5M 8M 14M | 500-1,000,000 | |
| L H XH | 500-1,000,000 | |
| T5K6 T10K6 T10K13 | 500-1,000,000 | |
| AT5K6 AT10K6 AT10K13 | 500-1,000,000 | |
| DT5 DT10 | 600-1,000,000 | |
| DAT5 DAT10 | 600-1,000,000 | |
| HTD D5M D8M | 600-1,000,000 | |
| DS8M | 600-1,000,000 | |
| DL DH | 600-1,000,000 | |
